HoloMonitor M4 Base Unit
This is the base unit of the HoloMonitor M4 system. It can be installed directly inside an incubator, hypoxia chamber or on a lab bench.
This article includes:
- HoloMonitor M4 Base Unit
- International Power Supply (110-240 V)
- USB cable
- 1 year warranty
Technical Information
Recommended Cell Culture Vessels
Regulatory Compliance
Requirements
Technical Information
| Sample stage | Fixed |
|---|---|
| Light source | External laser unit, 635 nm |
| Sample illumination | 635 nm, 0.2 mW/cm2 |
| Lateral resolution | 1 μm |
| Field of view | 0.25 mm2 |
| Working distance | 0.5 – 2 mm |
| Autofocusing range | 1.5 mm |
| Maximum image rate | 1 image/s |
| Image size | 1024 × 1024 pixel |
| Dimensions | 290 × 170 × 185 mm (W × D × H) |
| Weight | 3.75 kg |
| Cell culture vessels | 6-well, 24-well, 96-well, Petri, IBIDI |
| Power supply | International 110 – 240 V |
| Interface cable | USB |
| Warranty | 1 year |
Recommended Cell Culture Vessels
| 35 mm Sarstedt Petri dishes with HoloLid |
| IBIDI plastic ware (channel slides, chemotaxis slides, wound healing inserts) |
| Sarstedt 6-well plates with HoloLid |
| Sarstedts Lumox 24 or 96 well plates with HoloLid |
Regulatory Compliance
| Electromagnetic compatibility | 2014/30/EU and 2014/35/EU (low voltage directive) |
|---|---|
| Safety requirements | IEC 61010-1:2010 (electrical equipment for measurement, control and laboratory use) |
| Safety of laser products | IEC 60825-1:2014 |
CE marking are subject to the general principles set out in Article 30 of Regulation (EC) No 765/2008.
Requirements
Sample and environment |
|
| Cells | Monolayer of adherent cells |
|---|---|
| Incubator | Access port for cabling |
| Operating temperature | 10 – 40° C |
| Operating humidity | Max 95% |
Computer |
|
| Operating system | Windows 10, 64-bit |
| Processor | Intel Core i7 |
| Memory | 16 GB RAM (8 GB minimum) |
| Hard drive | 556 GB SSD (256 GB minimum) and external USB3 hard drive for backup and transfer |
| Display | Full HD (1920×1080) or higher |
The files associated with App Suite are stored in the folder C:PHI, which must not be used for anything else. User-created data is stored under Documents. However, the user data location can be changed at any time. We recommend disabling the internet connection during experiments, as e.g. updates will disrupt the experiments.
For service purposes, it is convenient if the computer can access internet when needed.
