Webshop / HoloMonitor / HoloMonitor M4 Base Unit
HoloMonitor M4 Base Unit

HoloMonitor M4 Base Unit

€10,400

This is the base unit of the HoloMonitor M4 system. It can be installed directly inside an incubator, hypoxia chamber or on a lab bench.

This article includes:

  • HoloMonitor M4 Base Unit
  • International Power Supply (110-240 V)
  • USB cable
  • 1 year warranty
SKU: 42100 Category:

Technical Information

Sample stage Fixed
Light source External laser unit, 635 nm
Sample illumination  635 nm, 0.2 mW/cm2
Lateral resolution 1 μm
Field of view  0.25 mm2
Working distance 0.5 – 2 mm
Autofocusing range 1.5 mm
Maximum image rate  1 image/s
Image size 1024 × 1024 pixel
Dimensions 290 × 170 × 185 mm (W × D × H)
Weight 3.75 kg
Cell culture vessels  6-well, 24-well, 96-well, Petri, IBIDI
Power supply International 110 – 240 V
Interface cable USB
Warranty 1 year

Recommended Cell Culture Vessels

35 mm Sarstedt Petri dishes with HoloLid
IBIDI plastic ware (channel slides, chemotaxis slides, wound healing inserts)
Sarstedt 6-well plates with HoloLid
Sarstedts Lumox 24 or 96 well plates with HoloLid

Regulatory Compliance

Electromagnetic compatibility 2014/30/EU and 2014/35/EU (low voltage directive)
Safety requirements IEC 61010-1:2010 (electrical equipment for measurement, control and laboratory use)
Safety of laser products IEC 60825-1:2014

CE marking are subject to the general principles set out in Article 30 of Regulation (EC) No 765/2008.

Requirements

Sample and environment
Cells Monolayer of adherent cells
Incubator Access port for cabling
Operating temperature 10 – 40° C
Operating humidity  Max 95%

Computer
Operating system Windows 10, 64-bit
Processor Intel Core i7
Memory 16 GB RAM (8 GB minimum)
Hard drive 556 GB SSD (256 GB minimum) and external USB3 hard drive for backup and transfer
Display Full HD (1920×1080) or higher

The files associated with App Suite are stored in the folder C:PHI, which must not be used for anything else. User-created data is stored under Documents. However, the user data location can be changed at any time. We recommend disabling the internet connection during experiments, as e.g. updates will disrupt the experiments.

For service purposes, it is convenient if the computer can access internet when needed.